#Easa part 66 B1,B2 MODULES EXAM MCQs QUESTION BANK : 7.3.8

7.3.8


QUIZ NO 8
Q1.              Struck with a mallet, the …………. uses cam action to impart a high amount of torque in a sharp impact to break loose a stubborn fastener
a)    impact driver
b)    torque wrench
c)    screw driver




Q2.            when a specific pressure must be applied to a nut or bolt as it is installed. In such cases a ………. must be used
a)    impact driver
b)    crowfoot or hook spanner
c)    calibrated torque wrench




Q3.            ……….. are designed especially for cutting heat treated aluminum alloy and stainless steel.
a)    aviation snips.
b)    chisels
c)    files.





Q4.            Aviation snips have colored handles to identify the direction of the cuts: yellow aviation snips,
a)    cut  straight
b)    curve left
c)    curve right





Q5.            Aviation snips have colored handles to identify the direction of the cuts: green  aviation snips
a)    curve left
b)    cut  straight
c)    curve right





Q6.            Aviation snips have colored handles to identify the direction of the cuts, red aviation snips
a)    curve left
b)    cut  straight
c)    curve right






Q7.            The common hacksaw handle can be obtained in …….. styles
a)    four
b)    three
c)    two




Q8.            When installing a blade in a hacksaw frame, mount the blade with the teeth
a)    pointing backward , towards the handle.
b)    pointing forward, away from the handle.
c)    pointing sideways





Q9.            The …………. hacksaw blade is most commonly used
a)    10 inch
b)    15 inch
c)    12 inch






Q10.             There are ……  types of hacksaw blades
a)    four
b)    three
c)    two

No comments:

Post a Comment

Friends if you have any query or you need any help, let me know at mortalmortal789@gmail.com

RMS Voltage Tutorial

What is RMS Voltage ? The RMS or effective value of a sinusoidal waveform gives the same heating effect of an equivalent DC supply In ou...