NOTE
TO CHECK YOUR PREPARATION ,PLZ WRITE DOWN YOUR SELECTED OPTIONS (A,B,C) ON ROUGH PAGE AND AT THE END OF QUIZ , VERIFY YOUR SELECTED OPTIONS WITH THE CORRECT OPTIONS GIVEN BELOW
1. The types of water present in aviation fuel are.
A. free and entrained both harmful.
B. free that is harmful and entrained that is harmless.
C. free that is harmless and entrained that is harmful.
2. Oil pressure and scavenge pumps are usually.
A. spur gear pumps.
B. multi-plunger pumps.
C. diaphragm pumps.
3. purpose of a pressure filter in a lubrication system is to.
A. protect the pressure pump.
B. protect the oil jets.
C. protect the scavenge pumps.
4. a curvic coupling.
A. converts rotary motion to reciprocating motion.
B. absorbs misalignment between the driving and driven shafts.
C. accurately aligns the driving and the driven shafts.
5. Feeders are.
A. conduits used to carry electrical cable.
B. fluid supply hoses.
C. heavy duty electrical generator cables.
6. High air humidity will.
A. have no affect on thrust.
B. reduce the thrust output.
C. increase the thrust output.
7. C.I.T sensor is made up of.
A. Iron-constantan.
B. Chromel-alumel.
C. Platinum-rhodium.
8. What is the maximum value of pressure with reference to a jet engine?.
A. 1 Bar.
B. 1 Kg/cm.
C. 1 Atmospheric Pressure.
9. The hottest casing is the.
A. H.PT.
B. combustion chamber.
C. L.PT.
Ans : H.PT.
10. Centrifugal compressor maximum tip speed is.
A. 0.8 Mach.
B. 1.2 Mach.
C. 0.5 Mach
1. The types of water present in aviation fuel are.
A. free and entrained both harmful.
B. free that is harmful and entrained that is harmless.
C. free that is harmless and entrained that is harmful.
2. Oil pressure and scavenge pumps are usually.
A. spur gear pumps.
B. multi-plunger pumps.
C. diaphragm pumps.
3. purpose of a pressure filter in a lubrication system is to.
A. protect the pressure pump.
B. protect the oil jets.
C. protect the scavenge pumps.
4. a curvic coupling.
A. converts rotary motion to reciprocating motion.
B. absorbs misalignment between the driving and driven shafts.
C. accurately aligns the driving and the driven shafts.
5. Feeders are.
A. conduits used to carry electrical cable.
B. fluid supply hoses.
C. heavy duty electrical generator cables.
6. High air humidity will.
A. have no affect on thrust.
B. reduce the thrust output.
C. increase the thrust output.
7. C.I.T sensor is made up of.
A. Iron-constantan.
B. Chromel-alumel.
C. Platinum-rhodium.
8. What is the maximum value of pressure with reference to a jet engine?.
A. 1 Bar.
B. 1 Kg/cm.
C. 1 Atmospheric Pressure.
9. The hottest casing is the.
A. H.PT.
B. combustion chamber.
C. L.PT.
Ans : H.PT.
10. Centrifugal compressor maximum tip speed is.
A. 0.8 Mach.
B. 1.2 Mach.
C. 0.5 Mach
ABOVE QUESTIONS WITH ANSWERS
1. The types of water present in aviation fuel
are.
A. free and entrained both harmful.
B. free that is harmful and entrained that is
harmless.
C. free that is harmless and entrained that is
harmful.
Ans : free and entrained both harmful.
2. Oil pressure and scavenge pumps are usually.
A. spur gear pumps.
B. multi-plunger pumps.
C. diaphragm pumps.
Ans : spur gear pumps.
.
3. The purpose of a pressure filter in a
lubrication system is to.
A. protect the pressure pump.
B. protect the oil jets.
C. protect the scavenge pumps.
Ans : protect the oil jets.
4. a curvic coupling.
A. converts rotary motion to reciprocating
motion.
B. absorbs misalignment between the driving and
driven shafts.
C. accurately aligns the driving and the driven
shafts.
Ans : accurately aligns the driving and the
driven shafts.
5. Feeders are.
A. conduits used to carry electrical cable.
B. fluid supply hoses.
C. heavy duty electrical generator cables.
Ans : heavy duty electrical generator cables.
6. High air humidity will.
A. have no affect on thrust.
B. reduce the thrust output.
C. increase the thrust output.
Ans : reduce the thrust output.
7. C.I.T sensor is made up of.
A. Iron-constantan.
B. Chromel-alumel.
C. Platinum-rhodium.
Ans : Platinum-rhodium.
8. What is the maximum value of pressure with
reference to a jet engine?.
A. 1 Bar.
B. 1 Kg/cm.
C. 1 Atmospheric Pressure.
Ans : 1 Atmospheric Pressure.
9. The hottest casing is the.
A. H.PT.
B. combustion chamber.
C. L.PT.
Ans : H.PT.
10. Centrifugal compressor maximum tip speed is.
A. 0.8 Mach.
B. 1.2 Mach.
C. 0.5 Mach.
Ans : 1.2 Mach.
No comments:
Post a Comment
Friends if you have any query or you need any help, let me know at mortalmortal789@gmail.com