NOTE
TO CHECK YOUR PREPARATION ,PLZ WRITE DOWN YOUR SELECTED OPTIONS ON ROUGH PAGE AND AT THE END OF QUIZ , VERIFY YOUR SELECTED OPTION WITH THE CORRECT OPTIONS GIVEN BELOW
11. To inhibit the fuel system of an installed engine.
A. pump oil into the engine when stationary.
B. dry motor the engine.
C. remove the ignitor plugs.
12. When is the humidity indicator checked on a preserved ?.
A. 1 Month.
B. 1 Year.
C. 6 Months.
13. With an engine in storage, desiccant is used.
A. as an insecticide.
B. as a corrosion inhibitor.
C. to remove moisture from the air.
14. Small cuts in a M.V.P. engine storage bag can be repaired.
A. with adhesive PVC tape.
B. by vulcanising.
C. by replacing M.V.P.
15. When removing an engine for long-term storage, bleed valves should be.
A. removed.
B. locked closed.
C. open but blanked.
11. To inhibit the fuel system of an installed engine.
A. pump oil into the engine when stationary.
B. dry motor the engine.
C. remove the ignitor plugs.
12. When is the humidity indicator checked on a preserved ?.
A. 1 Month.
B. 1 Year.
C. 6 Months.
13. With an engine in storage, desiccant is used.
A. as an insecticide.
B. as a corrosion inhibitor.
C. to remove moisture from the air.
14. Small cuts in a M.V.P. engine storage bag can be repaired.
A. with adhesive PVC tape.
B. by vulcanising.
C. by replacing M.V.P.
15. When removing an engine for long-term storage, bleed valves should be.
A. removed.
B. locked closed.
C. open but blanked.
ABOVE QUESTIONS WITH ANSWERS
11. To inhibit the fuel system of an installed engine.
A. pump oil into the engine when stationary.
B. dry motor the engine.
C. remove the ignitor plected to the inlet of the L.P fuel pump.
Ans : dry motor the engine.
12. When is the humidity indicator checked on a preserved engine?.
A. 1 Month.
B. 1 Year.
C. 6 Months.
Ans : 1 Month.
13. With an engine in storage, desiccant is used.
A. as an insecticide.
B. as a corrosion inhibitor.
C. to remove moisture from the air.
14. Small cuts in a M.V.P. engine storage bag can be repaired.
A. with adhesive PVC tape.
B. by vulcanising.
C. by replacing M.V.P.
15. When removing an engine for long-term storage, bleed valves should be.
A. removed.
B. locked closed.
C. open but blanked.
No comments:
Post a Comment
Friends if you have any query or you need any help, let me know at mortalmortal789@gmail.com