QUIZ 3
Q1. In ……… type of fit shaft always bigger than the hole.
a) Interference
b) Clearance
c) Transition
Q2. In Interference type of fit
a) shaft always bigger than the hole.
b) shaft always smaller than the hole allows movement
c) shaft is always of the same size as the hole
Q3. In BS 4500 system, Deviations for holes are indicated by
a) capital letters
b) lower case
c) both A and B are correct
Q4. In BS 4500 system ,Deviations for shafts are indicated by by
a) capital letters
b) lower case
c) both A and B are correct
Q5. In BS 4500 system , Deviations for ………are indicated by capital letters
a) Shafts
b) Holes
c) both holes and shafts
Q6. In BS 4500 system , Deviations for ……… are indicated by by lower case
a) Shafts
b) Holes
c) both holes and shafts
Q7. …….is a difference in dimension that is necessary to give a particular class of fit between two parts
a) an allowance
b) deviation
c) tolerance
Q8. If the shaft is constant and the hole varies in size, then the system used is said to be
a) tolerance based
b) shaft based
c) hole based
Q9. If the hole is constant and the shaft varies in size, then the system is
a) hole based
b) shaft based
c) tolerance based
Q10. The …….. system is the one in more general use
a) hole based
b) shaft based
c) hole based
No comments:
Post a Comment
Friends if you have any query or you need any help, let me know at mortalmortal789@gmail.com