#Easa part 66 B1,B2 MODULES EXAM MCQs QUESTION BANK : 2.10.11

2.10.11










NOTE


TO CHECK YOUR PREPARATION ,PLZ WRITE DOWN YOUR SELECTED OPTIONS (A,B,C) ON ROUGH PAGE AND  AT THE END OF QUIZ , VERIFY YOUR SELECTED OPTIONS WITH THE CORRECT OPTIONS GIVEN BELOW




Question Number. 11. A zero fuel test on a fuel quantity indicating system is carried out with.
Option A. tanks completely full.
Option B. tanks completely empty.
Option C. tanks empty apart from unusable fuel.


Question Number. 12. After a tank bag has been replaced, a fuel flow test should be carried out at.
Option A. tank outlet.
Option B. engine inlet.
Option C. tank shut-off valve point.


Question Number. 13. In biologically contaminated fuel, corrosion takes place.
Option A. below the fungal colonies.
Option B. the top of the tank.
Option C. the bottom 2 inches of the tank.


Question Number. 14. If an aircraft has ability to transfer fuel in flight, provision must be made to.
Option A. shut off fuel before structural damage.
Option B. provide overflow facility to dump fuel.
Option C. stop engine from using tank during transfer.


Question Number. 15. In a fuel system with interconnected vents.
Option A. an expansion space is not required.
Option B. the expansion space must be 2% of the tank capacity.
Option C. the expansion space must be 10% of the tank capacity.


Question Number. 16. Fuel tanks interconnected must have.
Option A. vents to allow overfueling.
Option B. protection against overfill for tanks and fuel system.
Option C. tank where fuel is fed from both tanks to engine inlet.


Question Number. 17. When a FADEC system loses air data input it goes to.
Option A. soft reversion.
Option B. hard reversion.
Option C. mechanical reversion.



Question Number. 18. Pressure refuelling is carried out at.
Option A. 20 PSI.
Option B. 40 PSI.
Option C. 15 PSI.


Question Number. 19. Cross feed valves permit fuel transfer from.
Option A. tank to tank.
Option B. left tank to right tank.
Option C. any tank to any engine.



Question Number. 20. What is fitted to the fuel jettison pipe to prevent vaporisation?.
Option A. An anti-corona device.
Option B. A corona device.
Option C. A nozzle.


ABOVE QUESTIONS WITH ANSWERS 

Question Number. 11. A zero fuel test on a fuel quantity indicating system is carried out with.
Option A. tanks completely full.
Option B. tanks completely empty.
Option C. tanks empty apart from unusable fuel.
Correct Answer is. tanks empty apart from unusable fuel.
Explanation. AL/10-3 11.14.1.e.

Question Number. 12. After a tank bag has been replaced, a fuel flow test should be carried out at.
Option A. tank outlet.
Option B. engine inlet.
Option C. tank shut-off valve point.
Correct Answer is. engine inlet.
Explanation. NIL.


Question Number. 13. In biologically contaminated fuel, corrosion takes place.
Option A. below the fungal colonies.
Option B. the top of the tank.
Option C. the bottom 2 inches of the tank.
Correct Answer is. below the fungal colonies.
Explanation. AL/3-15 para 8.3.

Question Number. 14. If an aircraft has ability to transfer fuel in flight, provision must be made to.
Option A. shut off fuel before structural damage.
Option B. provide overflow facility to dump fuel.
Option C. stop engine from using tank during transfer.
Correct Answer is. shut off fuel before structural damage.
Explanation. JAR 25.957.

Question Number. 15. In a fuel system with interconnected vents.
Option A. an expansion space is not required.
Option B. the expansion space must be 2% of the tank capacity.
Option C. the expansion space must be 10% of the tank capacity.
Correct Answer is. the expansion space must be 2% of the tank capacity.
Explanation. JAR 25.969.

Question Number. 16. Fuel tanks interconnected must have.
Option A. vents to allow overfueling.
Option B. protection against overfill for tanks and fuel system.
Option C. tank where fuel is fed from both tanks to engine inlet.
Correct Answer is. protection against overfill for tanks and fuel system.
Explanation. JAR 25.969.

Question Number. 17. When a FADEC system loses air data input it goes to.
Option A. soft reversion.
Option B. hard reversion.
Option C. mechanical reversion.
Correct Answer is. soft reversion.
Explanation. TTS FADEC Booklet Page 13.


Question Number. 18. Pressure refuelling is carried out at.
Option A. 20 PSI.
Option B. 40 PSI.
Option C. 15 PSI.
Correct Answer is. 40 PSI.
Explanation. AL/3-17 5.4 says 'up to 50 psi'.


Question Number. 19. Cross feed valves permit fuel transfer from.
Option A. tank to tank.
Option B. left tank to right tank.
Option C. any tank to any engine.
Correct Answer is. any tank to any engine.
Explanation. B737 MM 28-22-00 Page 1.


Question Number. 20. What is fitted to the fuel jettison pipe to prevent vaporisation?.
Option A. An anti-corona device.
Option B. A corona device.
Option C. A nozzle.
Correct Answer is. An anti-corona device.
Explanation. NIL.

No comments:

Post a Comment

Friends if you have any query or you need any help, let me know at mortalmortal789@gmail.com

RMS Voltage Tutorial

What is RMS Voltage ? The RMS or effective value of a sinusoidal waveform gives the same heating effect of an equivalent DC supply In ou...